Single Bus Encoder

£350.00

  • Easy to install, all inputs marked with their respective notes.

  • Has 4 x 61 inputs for up to 4 manuals or 3 manuals and pedals.

  • Inputs can also be used for stops and pistons.

  • Supports a single swell pedal.

  • USB MIDI interface as well as legacy MIDI 5 pin DIN built-in.

  • Class compliant MIDI device – No additional MIDI drivers required.

  • Powered by USB – No other power source required.

  • Solder pads for easy & reliable connection.

  • Works with older keyboards which use a single wire (bus) connecting all the keys.

  • No programming required, simply connect your keys, stops & USB – Done!

  • No need for external diodes or grouping of notes – simply wire each key directly.

  • Works with Hauptwerk, Grand Orgue and other Virtual Organ Software.

In stock

Description

The Hauptwerk Hardware Single Bus Encoder is a device designed to easily connect keyboards that have a single common connection (bus) running along one side of all the keys, and single wires coming from the other side of each key, originally connecting them to the organ electronics. It has the capacity for four keyboards as well as a single swell pedal. It is most suited for the smaller organ where it would usually have two manuals connected as well as a full pedal-board. This configuration then leaves 90 further inputs that can be used for stops and pistons.

Product Features.

  • Easy to install, all inputs marked with their respective notes.

  • Has 4 x 61 inputs for up to 4 manuals or 3 manuals and pedals.

  • Inputs can also be used for stops and pistons.

  • Supports a single swell pedal.

  • USB MIDI interface as well as legacy MIDI 5 pin DIN built-in.

  • Class compliant MIDI device – No additional MIDI drivers required.

  • Powered by USB – No other power source required.

  • Solder pads for easy & reliable connection.

  • Works with older keyboards which use a single wire (bus) connecting all the keys.

  • No programming required, simply connect your keys, stops & USB – Done!

  • No need for external diodes or grouping of notes – simply wire each key directly.

  • Works with Hauptwerk, Grand Orgue and other Virtual Organ Software.

Board dimensions (WxLxH): 405 x 125 x 25mm (16″ x 5″ x 1”).